eLine Technology VL-PIR - Manual (Page 6)

Visible Light PIR Camera OSD Menu Tree eLineTechnology.com
3. WHITE BALANCE
To adjust the screen color, you can use the White Balance function.
1. Once the SETUP menu screen is displayed, choose ‘WHITE BAL’ by using the Up and
Down buttons in order to indicates the arrow ‘WHITE BAL’
2. You can select a wanted mode by using the Up and Down buttons.
※ Please select one of the following 5 modes, as appropriate for your purpose
● ATW : You can select this when the color temperature is between 2,000°K and 9,500°K.
●
AWB : Auto White Balance.
● AWC→SET: To adjust the optimal luminance level for the current environment point the camera
towards a sheet of white paper and press the Function Setup switch. If the environment
changes, please readjust it.
● MANUAL : You can select this to fine-tune White Balance first by using the ATW or AWC
mode. Then, switch to MANUAL mode fine-tune the White Balance (BLUE, RED)
and then press the SET button.
● INDOOR : White Balance for indoor circumstance.
● OUTDOOR : White Balance for outdoor circumstance.