DE DIETRICH MIT-II-E, MIT-II-H, MIT-EP, MIT-HP and QUADROPAC DUP 500 - Manual (Page 15)

15
14/04/2010 - 300015090-001-L MIT-II - MIT/P - QUADROPAC DUP 500
6.2 Customising the programmes
Write the customized programmes in the tables below, then save
them as follows:
1. Open the cover to access to the setting and programme keys.
2. Press key J to select the paragraph (#PROG. CIRC.A -
#PROG. CIRC.B - #PROG. AUXIL - #PROG. DHW)
3. Select successive lines using key I .
The programming selected for line PROG EVERY DAY is
automatically copied to the other lines but can still be
individually modified for each day.
4. Use key %O to define the daytime periods (per 1/2 hour) (dark
areas on the graphic display).
Use key $P to define the Nighttime periods (per 1/2 hour)
(dark areas on the graphic display).
Use the return key
S if you make a mistake.
5. Proceed similarly for each connected circuit, if necessary.
6. When programming is completed, press key AUTO. Otherwise,
the programme will be automatically saved after 2 minutes.
To reset to the factory settings, press the key STANDARD for
5 seconds.
„ #PROG. CIRC.A
„ #PROG. CIRC.B
„
#PROG. AUXIL
„
#PROG. DHW: Domestic hot water
Day Daytime period
Monday
Tuesday
Wednesday
Thursday
Friday
Saturday
Sunday
Day Daytime period
Monday
Tuesday
Wednesday
Thursday
Friday
Saturday
Sunday
Day Daytime period
Monday
Tuesday
Wednesday
Thursday
Friday
Saturday
Sunday
Day Daytime period
Monday
Tuesday
Wednesday
Thursday
Friday
Saturday
Sunday