Installing the adapter – Asante Technologies 10/100 User Manual
Page 8
2
Installing the AsantéFAST 10/100
Adapter for NuBus
Installing the Adapter
The following instructions explain how to install the AsantéFAST 10/100
adapter.
∆
Note: You do not need to set any jumpers or switches on
the adapter.
1
Turn the power off and remove the computer cover.
➪
Important: A network adapter is sensitive to static elec-
tricity and must be handled carefully. If you do not han-
dle the adapter properly you can damage it and/or your
system.
2
Align the adapter’s edge connector with a NuBus slot.
3
Push the adapter down into the slot until the adapter locks into
place as shown below.
4
Replace the computer cover.
Expansion slot
Asante´FAST 10/100
NuBus adapter
NBAsanteFast Ch 2 Install Page 1 Wednesday, August 21, 1996 10:19 AM