Asante Technologies 10/100 - Manual (Page 23)

Page 4-8
Troubleshooting
Restarting Network Services
To restart network services after using the TroubleShooter diagnostic pro-
gram, perform the following steps:
1 Restart your Macintosh (normally).
2 Activate AppleTalk in the Chooser.
3 Select EtherTalk in the Network control panel.
4 Go to the Chooser and mount a remote volume or file server.
Using the ADLS Program
To run the Asanté Driver Local Statistics (ADLS) program on your Macintosh
in order to display the configuration information on the adapter, perform the
following steps.
1 Insert the Installer Disk into the drive and double-click the disk
icon to open it.
2 Double-click the Net Utils Folder icon.
3 Double-click the ADLS 10/100 NB icon to start the program.
The ADLS window appears showing the following adapter con-
figuration information: driver version, slot number, adapter type,
AppleTalk version, transmit status and receive status.
4 Verify the configuration information on the adapter.
5 Select Quit from the menu bar to close the ADLS program.
NBAsanteFast Ch 4LEDs Page 8 Wednesday, August 21, 1996 10:28 AM