Asante Technologies 10/100 - Manual (Page 20)

Page 4-5
Using the TroubleShooter Program
TroubleShooter warns you to change your AppleTalk connection:
If you need to make this change, click Quit, make the change,
and restart TroubleShooter.
When you click OK, TroubleShooter loads and automatically runs
the following three default tests.
❏ Memory buffer test
Writes to and reads from the packet buffer RAM to verify
its addressability and operation.
❏ Network interface controller (NIC) test
Writes to and reads from the controller register to verify
its operation.
❏ Ping-Pong test
Transmits and receives special packets to verify commu-
nication with other Macintoshes on the network.
If the Ping-Pong test fails, check your connectors and
cables. (It’s also possible that there’s no other Macintosh
on the network with which to communicate.)
TroubleShooter opens the TroubleShooter dialog box (see
below) and displays the results of the above three default tests.
NBAsanteFast Ch 4LEDs Page 5 Wednesday, August 21, 1996 10:28 AM