Configuring mactcp – Asante Technologies 10/100 User Manual
Page 27
Page 5-4
Asanté SNMP MacAgent
4
Select SNMP MacAgent.
5
Select MacTCP while pressing down the Shift key.
6
Click Install.
7
Restart your Macintosh.
Configuring MacTCP
To configure MacTCP, perform the following steps:
1
Select Control Panels from the Apple menu.
2
Double-click the MacTCP icon. The MacTCP Configuration
screen appears.
∆
Note: To configure MacTCP, see the MacTCP Adminis-
trator’s Guide. This guide is included with the Asanté-
View documentation.
3
Double-click More... and select Manually. This allows you to man-
ually enter your IP address.
4
Close the MacTCP control panel.
∆
Note: If you have any questions about your MacTCP
or SNMP configuration, contact your network adminis-
trator. It is important that the network administrator
be aware of any changes on the IP network.
NBAsanteFast Ch 5 SNMP Agent Page 4 Wednesday, August 21, 1996 10:29 AM