Link integrity led, Data traffic led – Asante Technologies 10/100 User Manual
Page 17
Page 4-2
Troubleshooting
Link Integrity LED
The green Link Integrity (LI) LED indicates whether the network link is
established. If link integrity is not detected, there is a link failure and the LI
LED will be off. The transmit and receive functions of the adapter also will
be disabled.
Data Traffic LED
The amber Data Traffic (TX) LED indicates the activity (transmit data) status
of the AsantéFAST10/100 adapter controller board. The LED should blink
when data packets are being transmitted from the adapter.
State
Description
On
• Link integrity is detected
Off
• No unshielded twisted-pair cable is
connected
• No power source to hub
• Unshielded twisted-pair cable is
faulty
• Unshielded twisted-pair wire
exceeds the recommended length
State
Description
Blinking
• Data packets being transmitted
Off
• Power off
• No data packets being transmitted
NBAsanteFast Ch 4LEDs Page 2 Wednesday, August 21, 1996 10:28 AM