Asante Technologies 10/100 User Manual
Page 15
Page 3-6
Installing the Network Driver
5
Open the Network control panel.
The Network window contains two types of network icons, Built-
in LocalTalk and EtherTalk.
6
Select EtherTalk by clicking on the EtherTalk icon in the Network
control panel.
A dialog box appears prompting you to confirm your selection.
7
Click OK to confirm your selection.
∆
Note: If you have more than one network card installed,
each card appears as a separate icon, labeled by a slot
number.
8
Close the Network control panel.
Your connection to Ethernet remains active until you switch to
LocalTalk, disconnect the cable, or remove the AsantéFAST 10/100
adapter.
9
Open Chooser and select a network resource, such as AppleShare
or another network service to verify your network connection.
NBAsanteFast Ch 3 Drivers Page 6 Wednesday, August 21, 1996 10:26 AM