Datamax-O'Neil H-Class Powered Internal Rewind Option - Manual (Page 5)

3
Step 2: Installing the Option
A) Align the Rewinder Assembly (Item
) to the Center Plate opening then,
while carefully seating it into the
Power Receptacle, insert the
Rewinder Assembly.
B) Using the three Mounting Screws
(Item ), secure the Rewinder
Assembly to the Center Plate.
Rewinder
Assembly
Mounting
Screws
Power
Receptacle
Center
Plate
C) Given the available uses of this option, proceed with the installation according to the needs of your
application:

To rewind onto empty media cores, proceed to D; or,

To rewind directly onto the Rewinder Hub, go to Step 3: “Using the Option.”
D) Insert the Tabs of the Core Adapter
(Item ) into the Rewinder Hub
Slots then slide the Core Adapter
onto the Rewinder Hub.
E) Grasp, pull and squeeze to collapse
the Rewinder Hub then slide the
Core Adapter forward until it snaps
into position over the Backstops.
Rewinder
Hub Slots
Tabs
Backstops
Core
Adapter
Rewinder Hub