CEMB USA C218 User Manual - Manual (Page 6)

6
2
1
4
3
5 6
Use and maintenance manual Rev. 04-2011
ENGLISH
Machine description
2.1 PURPOSE
It is a wheel balancing machine for trucks, light commercial
vehicles and cars.
It features excellent performance and is equipped with
a manual lift with sliding carriage which allows mounting
wheels of up to 250 kg on the spindle and, when fitted on
the balancing machine, must not interfere with any fixed part
of the machine, excluding the shaft and support adaptor.
The machine is supplied with equipment enabling the vast
majority of car and truck wheels available on the market
to be fitted.
Other wheels with special dimensions, geometry and centring
require special adaptors supplied on request.
The wheel balancing machine can operate without guards
since the balancing speed is only 100 rpm.
It functions properly without having to fasten it to the floor
with wheels weighing up to 160 kg; for heavier wheels,
fasten it at the points indicated.
Do not mount anything other than motorbike, car or truck
tyres on the wheel balancer.
The main features include:
▪ machine settings menu
▪ optimisation of tyre and rim unbalance
▪ STATIC programme, ALUS; SPLIT; USER control;
indication of exact correction weight position Self
diagnostics; Self calibration
▪ automatic minimisation of static unbalance.
2.2 TECHNICAL SPECIFICATIONS
The following data refers to the balancer in its standard
configuration.
Single-phase power supply 115 / 230 V 50/60 Hz
Protection class IP 54
Max.power consumption 0,8 kW
Balancing speed 100 min -1 (car)
70 min -1 (truck)
Measurement uncertainty 1 gr. (car)
10 gr. (truck)
Cycle time for wheel 8÷20 sec.
Average noise < 70dB (A)
Rim width setting range 1.5” ÷ 20” or 40 ÷ 510 mm
Diameter setting range 10” ÷ 30” or 265 ÷ 765 mm
Min/max. compressed air pressure 8 ÷ 10 kg/cm 2
approx. 0.8 to 1 Mpa;
approx. 8 to 10 bar;
approx. 115 to 145 psi.
Maximum wheel weight < 250 Kg.
Machine weight 210 Kg.
2.3 DIMENSIONS
2. Machine description
1. CONTROL PANEL
2. WEIGHT-TOOL HOLDER
3. LOCK NUT
4. AUTOMATIC GAUGE
5. LIFT
6. LIFT PEDAL