CEMB USA C218 User Manual - Manual (Page 11)

11
b
a
d
Use and maintenance manual Rev. 04-2011
ENGLISH
lowering t he guard for Width Measurement.
The option is disengaged at the end of
current Width Measurement.
Selecting the manual dimension preset-
ting screen
Return to initial screen.
Balancing run.
5.2.2 Manual presetting
If necessary, the dimensions can be inserted or edited in
manual mode as follows:
press ▪ +
pr ▪ ess to select the dimension to be preset
(red).
press / to preset the required value.
pre ▪ ss to change unit of measurement.
pr ▪ ess to preset the dimensions for the ALUS
correction mode
Defi nition of dimensions for correction using spring
weights:
d = DIAMETER:
Preset the nominal diameter stamped
on the rim.
b = WIDTH: Preset the nominal width indicated on
the rim (
STANDARD WHEELS) .
a = DISTANCE: Preset the distance of the inside of
the wheel from the machine, after
measuring it with relative gauge.
Use of the wheel balancer
Position of adhesive weights
In the event of correction type other than standard (spring
weight), follow the instructions on the screen for correct
detection of dimensions.
5.3 USER CONTROL
The wheel balancer can be used simultaneously by 4 different
users who, through a simple sequence, can memorize their
work condition and call it when needed. The users’ names
can be memorized (
PRESETTING THE CUSTOMER AND USER
NAME ).
5.3.1 To save USER
Pr ▪ eset the dimensions correctly according to the proce
dures already described in sections AUTOMATIC PRE
SETTING .
Press ▪ ; the “MENU” window appears on the
monitor.
Press ▪ ; a window appears with the list of availa
ble USERS. The current user is displayed in red.
Press the number corresponding to the required USER. ▪
The system returns to the initial screen automatically.
5.3.2 To call USER
Perfor ▪ m a measuring spin with any dimensions.
Press button ▪ ; the “MENU” window appears on
the screen.