J&M GC-24T Assembly - Manual (Page 7)

GC24
t
-1 G
rain
C
art
a
ssembly
-7-
STEP - 12
STEP - 11
Measure from corner to corner on the rails. Reposition the front leg to get the measurements to be
within 1/8” - 1/4” (3mm-6mm) of each other. Once completed, tighten all bolts to ensure that the
structure remains square. (do not tighten bolts on the front leg.)
Attach the rear rail cross brace. Use (27) M10 serrated flange hex head bolts and (27) M10 serrated hex
flange nuts. If the rear rail cross brace does not fit tight against the rear leg, attach the rear rail cross
brace shim.
m
easurement
this is the most important step.