J&M GC-24T Assembly - Manual (Page 26)

GC24
t
-1 G
rain
C
art
a
ssembly
-26-
STEP - 50
STEP - 49
Install the {1} rear slope splice plate & the {2} side slope splice plate. Use (10) M10 x 25MM serrated
hex head bolts and (10) M10 serrated hex flange nuts to attach them to the gearbox assembly.
Install the {3}inside sheddar panel splice plate. Use (10) M10 x 25MM serrated hex head bolts and (10)
M10 serrated hex flange nuts for attachment.
Before installing another panel tighten hardware on the lower panels and gearbox splice plates.
Install the rear lower sheddar panel. Use (18) M10 x 25MM serrated hex head bolts and (18) M10 ser-
rated hex flange nuts to attach the rear lower sheddar panel to the shell assembly.