J&M GC-24T Assembly - Manual (Page 49)

GC24
t
-1 G
rain
C
art
a
ssembly
-49-
STEP - 88
STEP - 88
14”
13”
73”
53.5”
50.5”
9.75”
For the slider option the diverter valve will need to be installed. Bolt the diverter valve in place using
(2) M10 serrated hex bolt and (2) M10 serrated hex head nuts. The valve will need to be positioned so
that when the auger “lands” on the auger rest, the valve should engage and the slider tube should begin
to retract in to its shortest position.
Install all of the hoses for the slider option. Install hoses accordingly to the image above. the
first time you run the auger, run it up slowly and adjust your hoses accordingly. The
hoses will pull tight and you will have to give them more slack. This is just for the first
time the auger is extended.
-Slider Option-
-Slider Option-