J&M GC-24T Assembly - Manual (Page 35)

GC24
t
-1 G
rain
C
art
a
ssembly
-35-
STEP - 67
STEP - 66
Install all three windows. The top window consists of the window and window seal. The front and rear
lower windows take (4) M10 x 25MM serrated hex head bolts, (4) M10 locking nuts, window, window
seal, (2) inner brackets, and (2) outer brackets. Start by insert the window seal followed by the window.
Then install both the inner and outer brackets with their hardware.
Install the ladder assembly. First attach the ladder brackets to the front panels. Use (2) M10 x 25MM
serrated hex head bolts and (2) M10 locking nuts. Now attach the ladder. Attach the top of the ladder
to the brackets using (2) M10 x 25MM serrated hex head bolts and (2) M10 locking nuts. Use the same
hardware to attach the ladder to the bottom brackets which are welded to the frame.