J&M GC-24T Assembly - Manual (Page 4)

GC24
t
-1 G
rain
C
art
a
ssembly
-4-
STEP - 6
STEP - 5
Place the front leg onto the main frame using an overhead hoist. Use a drift pin to help line up the holes.
Attach the front leg with (8) M24 x 75MM hex head bolts, M24 washers, and M24 nylon locking nuts.
note: do not completely tighten. the legs will need to be able to slide for adjustment in a later
step.
Place the rear leg onto the main frame using an overhead hoist. Use a drift pin to help line up the holes.
Attach the rear leg with (12) M24 x 75MM hex head bolts and (12) M24 nylon locking nuts.
Square up plates with frame then tighten.
M24 Washer
M24 Lock Nut
M24 Lock Nut
m24
x
75 mm B
olt
m24
x
75 mm B
olt