J&M GC-24T Assembly - Manual (Page 30)

-30-
STEP - 57
GC24
t
-1 B
olt
t
oGether
G
rain
C
art
Install the front and rear cross braces. One set includes two braces which are 130” inches(330cm)
in length. Use (2) M12 x 25 MM serrated flange hex head bolts and (2) M12 locking nuts to attach
the braces to the side gussets. Use (1) M12 x 25 MM serrated flange hex head bolt and (1) M12
locking nut to fasten the two cross braces together in the center.
Install the lower cross brace. The lower cross brace is 100” inches(254cm) in length. Use (2) M12
x 25 MM serrated flange hex head bolts and (2) M12 locking nuts to attach the lower cross brace to
the side slope braces.