Castle TSM-35 Operator Manual - Manual (Page 25)

CASTLE, INC TSM-35 OWNERS MANUAL V1.2 Page 25 of 33
Foot Pedal and Guard:
The Foot Pedal is mounted inside a yellow metal guard and is
connected to the machine by an electrical cord. The Foot Pedal
will activate the machine cycle only if the Safety Buttons are
depressed by the work piece.
Safety Interlock Switch:
The Safety Interlock Switch will automatically turn off the machine if
the Case Top is opened while the machine is on. The machine will
not turn on unless the Case Top is closed and the Interlock Key is
in the switch. Take care to keep the Interlock Safety Switch free of
sawdust.
Router Motor:
The Router Motor is located in the center of the machine and can
be accessed through the front door. The Baldor 1 ½ horse, 3-
phase motor turns the spindle that routs the pocket.
Drill Motor:
The Drill Motor is a custom designed, Sioux air drill mounted to the
yellow Drill Carriage. It is located under the Case Top in the center
of the white Safety Pallet, and is slightly offset towards the rear of
the machine. The Drill Motor is what drills the pilot hole.