MoTeC ADL EDL - Manual (Page 56)

54 Appendices
Measurement Methods : Ratiometric, Absolute, Variable Resistance, Off/On
Update Rate: 500 times / second
Filter: 150Hz 1 st order
Calibration Accuracy
Gain (Ratiometric operation) 0.05% max
Gain (Absolute operation) 0.15% max
Offset ± 6 mV max
Linearity ± 6 mV max
Temperature Stability 60 ppm/ °C max
Calibration Schedule 12 Months
Lambda Inputs
Type : Wide Band MoTeC
Measurement Range : 0.75 to 1.50 Lambda (or 0 to 1V)
Accuracy : 1.5 % up to 1.20 Lambda
Update Rate: 100 times / second
Switch Inputs
Suitable for : Switch to 0V, or Off / On Voltage signal
Pullup Resistor : 4700 ohms to 5V
Voltage Range : 0 to 15V
Positive Trigger Threshold : 3.5 V max
Negative Threshold : 1.0 V min
Hysteresis : 0.5 V Min
Measurement Methods : Off/ On only
Filter Time Constant: 22usec
Digital Inputs
Suitable for : Switch to 0V, Logic signal & open collector device (eg Hall
Switch)