I-View SDCI-220 Indoor Speed dome - Manual (Page 4)

4
I. Points for Attention
1.
Before installing the omni bearing intelligent unit, please read the
operation manual carefully.
2.
The camera takes power supply of DC12V/2A. You should assure
that the power supply of the product has an input voltage with load
about 12V rather than a unload voltage of 12V, otherwise the
camera couldn’t work normally.
3.
During the process of transportation, storage and installation, the
dome should be avoided of incorrect operations such as heavy
pressing, strong vibration etc. that can cause damage of product as
there are sophisticated optical and electronic devices inside the
machine.
4.
Do not attempt to disassemble the camera. In order to prevent
electric shock, do not remove screws or covers. There are no user
serviceable parts inside and only qualified personnel are to service
the unit.
5.
Always follow all electrical standards for safety when it is in
operation. Adopt the particular power supply, which is provided
with the dome. RS-485 and video signal should keep enough
distance with high voltage equipments and cables when they are in
transmission. Precautions for anti-lightning and anti-surging should
be taken if necessary.
6.
The product should be indoor installed and operated to avoid rain
and moisture. Do not use it in wet places.
If outdoor installation is needed, the closed protect cover should be used