I-View SDCI-220 Indoor Speed dome - Manual (Page 15)

15
V. Menu System
Menu Operation
Setup Preset 57 + [PRESET] or Press [MENU] button of the Joystick controller to
enter the Main Menu. The [FAR] Button of keyboard is the button for confirmation.
1.)
The items with “←→ ” are the submenu (See diagram 1). The item with
flashing ”
←→”
2.)
The items without “←→” are for parameters setting. The item with flashing
first character means being selected.
Move [WIDE] button to up for change selection, move [TELE] button to down
for change selection. Press [FAR] button to enter the needed item. Now
“ icon ”will flash. In the item submenu, move the joystick down to change the
selection.
3.)
Press [FAR] button to confirm the changing. After confirmation, “:”of current
item will be flashing, which means the item was selected. Then move the
joystick down to change the parameters.
4.)
After modification, press [FAR] button to confirm, then ":" will stop flashing,
and the first character of the selected item will be flashing again, means that the
modification finished and exit available.
5.)
is available for each menu page. Select it, and then press [FAR]
button to back to superior menu.
6.)
Select , and then press [FAR] button. The screen will show
WAIT, few seconds later, the menu will be closed, and the dome exits
the programming menu