Getting to know your appliance, The control panel, The hotplates – Neff T13K20N0 User Manual

Page 14: Hotplate and residual heat indicators, Setting the hob, Switching the hob on and off, Setting a hotplate, Note

Getting to know your appliance

The instruction manual is the same for various different hobs.

An overview of the models with their dimensions is given on

page 2.

The control panel

The hotplates

Hotplate and residual heat indicators

The hotplate and residual heat indicators

“

light up when a

hotplate is warm:

■

Hotplate indicator - during operation, shortly after you have

switched on a hotplate.

■

Residual heat indicator - after cooking, when the hotplate is

still warm.

You can use the residual heat to save energy, e.g. to keep a

small dish warm or to melt chocolate.

Setting the hob

This section informs you how to set the hotplates. The table

shows heat settings and cooking times for various meals.

Switching the hob on and off

You can switch the hob on and off with the hotplate controls.

Setting a hotplate

Adjust the heat setting of the hotplates using the hotplate

controls.
Heat setting 1 = lowest setting
Heat setting 9 = highest setting
The symbol in the display panel indicates the hotplate to which

the display relates, e.g.

for the right rear hotplate.

Note: Hotplate temperature is regulated by the heat switching

on and off. The heat may also switch on and off at the highest

setting.

+RWSODWH FRQWURO

IRU KHDW

VHWWLQJ DGMXVWPHQW

$FWLYDWLRQ

Æ SRZHU VHWWLQJ IRU WKH

KDORJHQ KRWSODWH

$FWLYDWLRQ

Í GXDOFLUFXLW

KRWSODWH

Hotplate

Activating and deactivating

Single-circuit hotplate

Dual-circuit hotplate

To activate: turn the hotplate control clockwise to

. Set the heat setting. To switch off: turn the

hotplate control to 0 and reset. Never turn the hotplate control beyond the

symbol to 0.

Halogen hotplate

Note: do not look into the halogen light as the glare may dazzle the eyes.

Halogen hotplate with

power setting

To activate: turn the hotplate control to the

Power setting. The hotplate control clicks into

place. To switch off: turn the hotplate control from the power setting to the desired heat setting.

When the hotplate is activated, the corresponding indicator lights up.