B&K Precision 9116 - Programming Manual User Manual
Page 9
1
3
4
OC
OP
OT
Over current
Over power
Over temperature
0
2
3
4
5
7
OPC
QYE
DDE
EXE
CME
PON
Standard event register
Operation completed. All the parallel operations are completed.
Query error. Output buffer data lost.
Instrument memory data loss or self test error
Execute error. Command parameter over flow or the operation condition is
not consistent
Command error. There is syntax or semantic error in the command received.
Power on bit, this bit is set to 1 after power on
2
3
4
5
6
7
EAV
QUES
MAV
ESB
RQS
OPER
Status byte register
Error buffer available
This bit is set to 1 when any one status of enabled query status register
changes.
Output buffer available
Bit ESB is set to 1 when the status of a enabled standard event status register
changes
If the status of enabled operation register changes, then this bit is set to1.
STATUS Subsystem
STATus:QUEStionable[:EVENt]?
This command can be used to read the value in query event register. After executing this
command, the query event register will be cleared.
Query syntax: STATus:QUEStionable[:EVENt]?
Parameter: None
Returned parameter:
Relative command: STATus:QUEStionable:ENABle
The bit definition of query event enable register:
Bit
Position
15
14
13
12
11
10
9
8
Bit Name
Not
used
Not
used
Not
used
Not
used
Not
used
Not
used
Not
used
Not
used
Bit Weight
Bit
Position
7
6
5
4
3
2
1
0
Bit Name
Not
used
Not
used
Not
used
OT
OP
Not
used
OC
OV
Bit Weight
16
8
2
1