AUMA Electric multi-turn actuators SA 07.1 - 48.1_SAR 07.1 - 30.1 NORM - Manual (Page 26)

20. Disposal and recycling
AUMA actuators have an extremely long lifetime. However, they have to be
replaced at one point in time.
The actuators have a modular design and may therefore easily be disassembled,
separated, and sorted according to materials, i.e.:
.
electronic scrap
.
various metals
.
plastics
.
greases and oils
The following generally applies:
.
Collect greases and oils during disassembly. As a rule, these substances are
hazardous to water and must not be released into the environment. .
Arrange for controlled waste disposal of the disassembled material or for
separate recycling according to materials. .
Observe the regional regulations for waste disposal.
21. Service AUMA offers extensive services such as maintenance and inspection for actuators.
The AUMA service department can be reached at:
phone:
724-743-AUMA (2862)
fax: 724-743-7411
email: [email protected]
www.auma-usa.com or www.auma.com.
26
Multi-turn actuators SA 07.1 – SA 48.1 / SAR 07.1 – SAR 30.1
AUMA NORM
Operation instructions