Atec Tektronix-AWG5012 - Manual (Page 7)

AWG5000 Series • www.tektronix.com/signal_sources 7
Arbitrary Waveform Generator
AWG5000 Series (AWG5014 • AWG5012 • AWG5004 • AWG5002)
AWG5014 AWG5012 AWG5004 AWG5002
Auxiliary Outputs
Marker Output
Number of Outputs
8 (2 per ch) 4 (2 per ch) 8 (2 per ch) 4 (2 per ch)
Output Style Single-ended
Output Impedance 50 Ω
Connector BNC Front
Level (into 50 Ω)
(Twice for Hi_Z input)
Output Windows –1.00 V to + 2.7 V
Amplitude 0.10 V
p-p
to 3.7 V
p-p
Resolution 10 mV
DC Accuracy ±(10% of setting +120 mV)
Maximum Output Current ± 54 mA /ch
Rise/Fall Time (20% to 80%) 300 ps (1.0 V
p-p
, Hi +1.0 V, Lo 0 V)
Skew Adjust Between Markers
Range
0 to 1000 ps
Resolution 50 ps
Random Jitter (Typical) 1010 clock pattern
RMS 5 ps
rms
Total Jitter (Typical) 2^ 15–1 PN data pattern
Peak to Peak (p-p) 80 ps
p-p
Clock (VCO) Out
Range
600 MHz to 1.2 GHz
Amplitude 0.4 V
p-p
into 50 Ω to GND
Impedance: 50 Ω, AC coupling
Connector BNC Rear
10 MHz Reference Out
Amplitude
1.2 V
p-p
into 50 Ω. Max 2.5 V
p-p
open
Impedance 50 Ω, AC coupling
Connector BNC Rear
DC Outputs
Number of Outputs
4: independently controlled outputs
Range –3.0 to +5.0 V
Resolution 10 mV
Max. Current ± 100 mA
Connector 2x4 pin header on front panel
Digital Data Output (Option 03)
Number of Output
NA 14 bits output on channel 1 NA 14 bits output on channel 1
and channel 2 (28 total) and channel 2 (28 total)
Output Style Single-ended Single-ended
Output Impedance 50 Ω 50 Ω
Connector SMB rear SMB rear
Level (into 50 Ω)
(Twice for Hi_Z input)
Output Windows –1.00 V to + 2.7 V –1.00 V to + 2.7 V
Amplitude 0.10 V
p-p
to 3.7 V
p-p
0.10 V
p-p
to 3.7 V
p-p
Resolution 10 mV 10 mV
DC Accuracy ± (10% of setting +120 mV) ± (10% of setting +120 mV)
Maximum Output current ± 54 mA /ch ± 54 mA /ch
Rise/Fall Time (20% to 80%) 300 ps 300 ps
(1.0 V
p-p
, Hi +1.0 V, Lo 0 V) (1.0 V
p-p
, Hi +1.0 V, Lo 0 V)