Atec Tektronix-AWG5012 - Manual (Page 5)

AWG5000 Series • www.tektronix.com/signal_sources 5
Arbitrary Waveform Generator
AWG5000 Series (AWG5014 • AWG5012 • AWG5004 • AWG5002)
Characteristics
AWG5014 AWG5012 AWG5004 AWG5002
Arbitrary Waveforms
Waveform Length
1 to 16,200,000 points (or 1 to 32,400,000 points, option 01)
Number of Waveforms 1 to 16,000
Sequence Length 1 to 4,000 steps
Sequence Repeat Counter 1 to 65,536 or infinite
Sequence Control Repeat count, Trigger, Go-to-N and Jump
Jump Mode Synchronous and Asynchronous
Run Modes
Continuous
Waveform is iteratively output. If a sequence is defined, the sequence order and repeat functions are applied
Triggered Waveform is output only once when an external, internal, GPIB, LAN or manual trigger is received
Gated Waveform begins output when gate is true and resets to beginning when false
Sequence Waveform is output as defined by the sequence
Clock Generator
Sampling Frequency
10 MS/s to 1.2 GS/s 10 MS/s to 600 MS/s
Resolution 8 digits
Internal Clock
Accuracy Within ± (1 ppm + Aging),
Aging: within ± 1 ppm/year
Clock Phase Noise Less than –90 dBc/Hz at 100 kHz offset
Internal Trigger Generator
Internal Trigger Rate
Range
1.0 µs to 10.0 s
Resolution 3 digits, 0.1 µs minimum
Skew Control Between Outputs
Range
– 5 ns to + 5 ns
Resolution 5 ps