Atec Tektronix-DPO4104 User Manual

Page 6

Oscilloscope • www.tektronix.com/oscilloscopes

Digital Phosphor Oscilloscopes

DPO4000 Series

Digital Phosphor Oscilloscopes

DPO4000 Series

Oscilloscope • www.tektronix.com/oscilloscopes

Search – Tired of turning the horizontal position
knob endlessly on your current scope to find the
event you’re looking for? Use the DPO4000’s pow-
erful Search feature to find and mark all occur-
rences of an event based on user specified criteria.
Search types include edge, pulse width, runt, logic,
setup and hold, rise/fall time, and I2C, SPI, and
CAN packet content.

Serial Buses – Trigger on packet level content,
view acquired data as a bus with all packets
decoded into hex or binary, search through acqui-
sitions for specific packet content and even view
all packets decoded in a tabular format, much like
you would see on a logic analyzer. Serial standards
supported include I2C, SPI and CAN.

Stunning Display – The DPO4000 Series
boasts the largest and highest resolution display of
any scope in its class at 10.4" (264 mm) and
1,024x768 resolution (XGA).

Zoom/Pan – Dedicated front panel controls for
zooming and panning. The inner knob controls
zoom factor while the outer ring adjust pans the
zoom box across the waveform. Navigating your
waveform has never been easier.

Marks – Want to mark your waveform for future
reference or for quick navigation between events
of interest? Simply press the Set Mark button to
place “bookmarks” on your waveform. Use the <---
and ---> buttons to navigate through user marks
and search generated marks.

Mass Storage – Use the front panel USB and
CompactFlash ports for simple and convenient
storage of screenshots, waveform data, and oscillo-
scope setups. Two more USB host ports are avail-
able on the rear panel for peripheral connections
as well as a USB device port for instrument control
using USBTMC.

Vertical Controls – Knob-per-channel vertical
controls provide simple and intuitive operation. No
longer do you need to share one set of vertical
controls across all four channels!

TekVPI

™

– New TekVPI probe interface provides

for direct connect current probes, intuitive comp
box controls, remote control of probe settings and
smarter communication between the oscilloscope
and the probe.

Only 5.4" Deep! – Despite the impressive
performance, huge display, and knob-per-channel
controls, the DPO4000 Series is only 5.4" deep,
saving you valuable space on your test bench.