Atec Tektronix-DPO4104 - Manual (Page 4)

Digital Phosphor Oscilloscopes
DPO4000 Series
Search – Serial triggering is very useful for
isolating the event of interest, but once
you’ve captured it and need to analyze
the surrounding data, what do you do?
In the past, users had to manually scroll
through the waveform counting and
converting bits and looking for what
caused the event. With the DPO4000
Series, you can have the oscilloscope
search through the acquired data for
user-defined criteria including serial
packet content. Each occurrence is high-
lighted by a search mark. Rapid navigation
between marks is as simple as pressing the
Prev and Next buttons on the front panel.
The Performance and Feature Set
You Expect
The DPO4000 Series digital phosphor
oscilloscopes (DPO) deliver the performance
you need to visualize even your most
demanding signals. Bandwidths range
from 350 MHz to 1 GHz, and with all
models offering a minimum of 5x over-
sampling on all channels and sin(x)/x
interpolation standard, you can be confident
that even the fastest transient events will
be captured and displayed accurately.
The standard 10 M record length on all
channels enables you to capture long
windows of signal activity while maintaining
fine timing resolution.
The DPO4000 Series offers a variety of
analytical solutions including cursors, 25
automatic measurements, statistics and
waveform math. Despite a tiny footprint
(only 5.4" deep) and lightweight (11 lbs.),
the DPO4000 Series offers exceptional
performance, a large 10.4" XGA display
and knob per channel vertical controls.
The new TekVPI ™ probe interface sets
the standard for ease of use in probing.
TekVPI probes feature status indicators
and controls, as well as a probe menu
button right on the comp box itself. This
button brings up a probe menu on the
oscilloscope display with all relevant
settings and controls for the probe. The
TekVPI interface utilizes a new probe
power management architecture enabling
direct attachment of current probes
without requiring a separate, bulky power
supply. Finally, TekVPI probes can be
controlled remotely via USB, GPIB or
Ethernet, enabling more versatile
solutions in ATE environments.
The DPO4000 Series delivers an
unprecedented new level of USB plug
‘n’ play operation and PC connectivity.
Acquiring data and measurements from
the instrument is as simple as connecting
a USB cable from the oscilloscope to the
Oscilloscope • www.tektronix.com/oscilloscopes 4
Packet decode table showing decoded Identifier, DLC, Data and CRC for every CAN packet in a
long acquisition.
Fast waveform capture rate maximizes the
probability of capturing elusive glitches and
other infrequent events.