Atec Tektronix-TLA700 Series - Manual (Page 7)

LOGIC ANALYZER “N” MODULE OPTIONS
(Base configuration is 64 K depth @ 100 MHz state)
1S – Increase to 256 K depth @ 100 MHz state.
2S – Increase to 1 M depth @ 100 MHz state.
3S – Increase to 4 M depth @ 100 MHz state.
4S – Increase to 64 K depth @ 200 MHz state.
5S – Increase to 256 K depth @ 200 MHz state.
6S – Increase to 1 M depth @ 200 MHz state.
7S – Increase to 4 M depth @ 200 MHz state.
LOGIC ANALYZER “P” MODULE OPTIONS
(Base configuration is 16 M depth @ 100 MHz state)
1S – Increase to 16 M depth @ 200 MHz state.
TLA 700 SERIES MODULE UPGRADES
You can increase the memory depth and state speed of
most existing TLA 700 Series logic analyzer modules.
You can also install a TLA 7Nx/Px logic analyzer module
into an existing TLA 704/711 or TLA 714/720 mainframe.
Please refer to the TLA Family Upgrade Guide for fur-
ther details.
LOGIC ANALYZER MODULE SERVICE OPTIONS
Opt. IN – Product installation service (on-site
configuration and user familiarization, excluding
network integration).
Opt. R3 – Extends depot repair warranty service period
to three years.
Opt. C3 – Three years of calibration service (includes
initial certification and two annual calibrations).
Opt. D1 – Add calibration test data report.
Opt. D3 – Provide test data for each calibration (must
be ordered with Opt. C3).
LOGIC ANALYZER PROBE SELECTION GUIDE-
LINES
For the TLA 7Nx/Px logic analyzer modules, you have
your choice of three probe options:
P6418 (TLA 7Nx/Px Option 1P) – The P6418 (appli-
cation not pictured) is a 17 channel general-purpose
probe with leadsets and grabber tips for use with: 1)
probing individual test points within your target system,
either directly or with a test clip, or 2) direct connection
to legacy TLA family processor/bus support probe
adapters with 8 channel probe connectors. The P6418
works with a wide-range of industry-standard probing
accessories for flexible attachment to your target sys-
tem. This probe is recommended for most general-pur-
pose applications.
P6417 (TLA 7Nx/Px Option 3P) – The P6417 (appli-
cation shown below) is a 17 channel general-purpose
probe that is similar to the P6418 with the additional
capability that it allows you to separate the 8 channel
podlet groups into individual channels for both maxi-
mum electrical performance and maximum distance
between adjacent channels. This probe is recommend-
ed for those general-purpose applications that require
maximum flexibility.
P6434 (TLA 7Nx/Px Option 2P) – The P6434 (appli-
cation shown below) is a lightweight probe with quick
connect/disconnect and a positive latching mechanism
to ensure a secure, reliable connection. It is for use
with: 1) applications where you have designed in the
AMP
® Mictor ® high-density connectors into your target
system, or 2) direct connection to newer TLA family
processor/bus support probe adapters with AMP Mictor
34 channel probe connectors. An optional low-profile
adapter for low-clearance applications is also available.
This probe is recommended for all high-density applica-
tions.
LOGIC ANALYZER MODULE PROBES AND
ACCESSORIES
17 channel general-purpose Probe and
Accessories for TLA 7Lx/TLA 7Mx,
TLA 7Nx/TLA 7Px Logic Analyzer Modules – Order
P6417.
17 channel general-purpose Probe and
Accessories for TLA 7Lx/TLA 7Mx,
TLA 7Nx/TLA 7Px Logic Analyzer Modules – Order
P6418.
PATTERN GENERATOR MODULE
TLA 7PG2 – 64 channel Pattern Generator Module,
134 MHz data rate, 256 K depth (please select probe
option below).
Includes: Four probe cables, User Manual, Certificate
of Calibration and one year warranty (return to
Tektronix).
Opt. 1M – Increase to 1 M depth.
Opt. 1P – Add four P6470 TTL/CMOS probes (each
includes two 8 channel leadsets and one 5 channel
leadset).
Opt. 2P – Add four P6471 ECL probes (each includes
two 8 channel leadsets and one 5 channel leadset).
Opt. 1C – Add 168 SMT KlipChip grabber tips.
TLA700 SERIES PATTERN GENERATOR
MODULE(S) UPGRADES
You can increase the memory depth of most existing
TLA 700 Series pattern generator modules. You can also
install a TLA 7PG2 pattern generator module into and
existing TLA 704/711 or TLA 714/720 mainframe. Please
refer to the TLA Family Upgrade Guide for further
details.
PATTERN GENERATOR MODULE SERVICE
OPTIONS
Opt. IN – Product installation service (on-site configu-
ration and user familiarization, excluding network
integration).
Opt. R3 – Extends depot repair warranty service period
to three years.
Opt. C3 – Three years of calibration service (includes
initial certification and two annual calibrations).
Opt. D1 – Add calibration test data report.
Opt. D3 – Provide test data for each calibration (must
be ordered with Opt. C3).
16 channel TTL/CMOS Probe and Accessories for
TLA 7PG2 Pattern Generator Module – Order
P6470.
Part Number Description
116-0937-00 16 channel TTL/CMOS probe
012-1581-00 2 each – 8 channel leadsets
012-1580-00 1 each – 5 channel leadset
012-1570-00 (optional – std with TLA 7PG2
module) Probe Cable
16 channel ECL Probe and Accessories for
TLA 7PG2 Pattern Generator Module – Order
P6471.
Part Number Description
116-0938-00 16 channel ECL probe
012-1581-00 2 each – 8 channel leadsets
012-1580-00 1 each – 5 channel leadset
012-1570-00 (optional – std with TLA 7PG2
module) Probe Cable
DIGITIZING OSCILLOSCOPE MODULES
Includes: Probes, User Manual, Certificate of
Calibration, and One-year Warranty (return to
Tektronix).
TLA 7D1 – 2 channel DSO module, 500 MHz band-
width, 2.5 GS/s sample rate, 15 K depth (includes two
P6243 1.0 GHz active FET probes, probe calibration
adapter, and manual).
TLA 7D2 – 4 channel DSO module, 500 MHz band-
width, 2.5 GS/s sample rate, 15 K depth (includes four
P6243 1.0 GHz active FET probes, probe calibration
adapter, and manual).
TLA 7E1 – 2 channel DSO module, 1 GHz bandwidth,
5 GS/s sample rate, 15 K depth (includes two P6245
1.5 GHz active FET probes, probe calibration adapter,
and manual).
TLA 7E2 – 4 channel DSO module, 1 GHz bandwidth,
5 GS/s sample rate, 15 K depth (includes four P6245
1.5 GHz active FET probes, probe calibration adapter,
and manual).
TLA700 SERIES DSO MODULE UPGRADES
You can install a TLA 7Dx/Ex digitizing oscilloscope
module into an existing TLA 704/711 or TLA 714/720
mainframe. Please refer to the TLA Family Upgrade
Guide for further details.
DSO MODULE SERVICE OPTIONS
Opt. IN – Product installation service (on-site
configuration and user familiarization, excluding
network integration).
Opt. R3 – Extends depot repair warranty service period
to three years.
Opt. C3 – Three years of calibration service (includes
initial certification and two annual calibrations).
Opt. D1 – Add calibration test data report.
Opt. D3 – Provide test data for each calibration (must
be ordered with Opt. C3).
L O G I C A N A L Y Z E R S • T L A 7 0 0 S E R I E S 7
Ordering Information