Atec Rohde-Schwarz-SMA100A - Manual (Page 13)

Base unit
Frequency
Frequency range
9 kHz to 3 GHz/6 GHz
Setting time < 2 ms
Level
Range
–145 dBm to +18 dBm (up to +28 dBm overrange)
Setting time < 1.5 ms
Setting time in List mode/Fast Hopping mode < 450 µs
Spectral purity (at f = 1 GHz)
Nonharmonics (carrier offset > 10 kHz, f ≤ 1500 MHz)
< –80 dBc
< –90 dBc with the R&S®SMA-B22 option
SSB phase noise (20 kHz carrier offset, 1 Hz measurement bandwidth) < –131 dBc (typ. –134 dBc)
< –136 dBc (typ. –139.5 dBc) with the R&S®SMA-B22 option
Wideband noise (carrier offset > 10 MHz, 1 Hz measurement bandwidth,
750 MHz < f ≤ 1500 MHz) < –153 dBc (–160 dBc, meas.)
Supported modulation modes
AM
standard
FM/φM optional (with the R&S®SMA-B20/R&S®SMA-B22 options)
Pulse standard
Chirped pulses optional (with the R&S®SMA-B20/R&S®SMA-B22 options)
VOR/ILS optional (with the R&S®SMA-K25 option)
DME optional (with the R&S®SMA-K26 option)
Clock synthesis
Frequency range
100 kHz to 1.5 GHz (with the R&S®SMA-B29 option)
Interfaces IEEE 488.2, LAN (10/100BaseT), 2 × USB, 1 × USB slave
Rohde & Schwarz R&S®SMA100A Signal Generator 13
Specificationsinbrief