Iso 9001 – Atec Rohde-Schwarz-SMP Series User Manual
Page 13

Microwave Signal Generator SMP
13
Remote control
System
IEC625 (IEEE488)
Command set
SCPI 1992.0
Connector
24-contact Amphenol
IEC/IEEE-bus address
0 to 30
Interface functions
SH1, AH1, T6, L4, SR1, RL1, PP1, DC1,
DT1, C0
General data
Power supply
90 V to 132 V (AC), 47 Hz to 440 Hz
180 V to 265 V (AC), 47 Hz to 440 Hz
autoranging, max. 400 VA
safety class I to VDE 0411 (IEC 348)
Electromagnetic compatibility
Standards adhered to
postal regulation 243/1991
EN55011 (VDE 0875 T11), class B
VDE 0875, suppression level K
MIL-STD-461B
- RE02 radiated emissions
- CE03 conducted emissions
- CS01/02 conducted susceptibility
RF leakage (f <1 GHz)
<0.1 µV (induced in a two-turn coil
2.5 cm in diameter held 2.5 cm away
from the surface of the case)
Radiated susceptibility
3 V/m
Ambient conditions
Rated temperature range
0°C to 55°C
10)
Storage temperature range
–40°C to +70°C
Humidity
DIN IEC 68-2-30, +40°C
Mechanical stress
Shock
to MIL-STD-810D, 40 g shock spectrum
Vibration
sinusoidal
random
to DIN IEC 68-2-6, 5 Hz to 55 Hz
10 m/s
2
rms, 10 Hz to 300 Hz
Dimensions (W x H x D)
435 mm x 192 mm x 570 mm
Weight
27 kg, when fully equipped
1)
For frequency changes beyond the 2 GHz and 20 GHz frequency limit the setting time is
max. 50 ms longer.
2)
Specifications for harmonics above 20 GHz (SMP 02/SMP 22), 27 GHz (SMP 03) and 40 GHz
(SMP 04) only typical.
3)
Without optional Attenuator SMP-B15/-B17 specifications apply to levels >–5 dBm only.
4)
The maximum level is reduced by up to 2 dB in the temperature range 35
°C to 55°C.
5)
The specified accuracy only applies to temperatures from 15
°C to 35°C. Outside this range the
accuracy may be degraded by max. 0.7 dB.
6)
The modulation depth adjustable within the AM specifications continuously decreases from
6 dB below the maximum level up to the maximum level.
7)
This specification does not apply to
a) non-interrupting level setting (ATTENUATOR MODE FIXED) if option SMP-B15/-B17 is used,
b) levels below –5 dBm without option SMP-B15/-B17,
c) external level control mode (EXT ALC).
8)
The functions of the standard FM remain available.
9)
Above 20 GHz (SMP 03/SMP 04) only 0.5 V/GHz available.
10)
The contrast of the LC display is degraded at high temperatures.
Certified Environmental System
ISO 14001
REG. NO 1954
Certified Quality System
ISO 9001
DQS REG. NO 1954