Atec Picotest-G5100A - Manual (Page 9)

Output
Impedance
110 Ω typical
Pattern Length 2 to 256 K
1 Add 1/10th of output amplitude and offset spec per ºC for operation outside the range of
18 ºC to 28ºC.
2 Autorange enabled.
3 DC offset set to 0V.
4 Spurious output at low amplitude is -75 dBm typical.
5 Add 1 ppm/ ºC average for operation outside the range of 18 ºC to 28 ºC.
6 FSK uses trigger input (1 MHz maximum).
7 Sine and square waveforms above 10 MHz are allowed only with an “infinite” burst count.
Specifications are subject to change without notice.
All other trademarks and trade names are the property of their respective companies.