Atec Picotest-G5100A - Manual (Page 2)

10. Arbitrary Frequency range: 1µHz to 10MHz
11. Waveform Length: 256K points max.
12. Vertical Resolution: 14 bits (including sign)
13. Sample Rate: 125 MS/s
14. Interface: USB, LAN and GPIB
Easy-To-Use Functions
• Internal modulations of AM, FM, PM (PSK), FSK & PWM for waveform adjustment.
• Built-in linear and logarithmic sweeps from 1ms to 500 s.
• The burst mode has a selectable number of cycles per period of time.
• Using remote control via USB, LAN and GPIB interface.
• The programmability by SCPI commands under the remote control connection.
• Precise phase adjustments and calibrations can be done from the front panel or via a PC.
User Friendly Operation
The front-panel operation of G5100A is simple and user friendly. Users can enter all functions
with a single key or two, and use knob or numeric keypad to adjust frequency, amplitude, offset
and other parameters. Otherwise, users can also directly input voltage values in Vpp, Vrms,
dBm or high & low levels. Timing parameters can be entered in Hertz (Hz) or second.
Users can easily use the following functions.
Functions and Waveforms
The Picotest G5100A 50 MHz Function / Arbitrary Waveform Generator can create stable,
precise, clean and low distortion sine waves by using DDS (Direct Digital Synthesis) Technology.
With fast rise and fall times up to 25 MHz for square waves and 200 KHz for linear ramp waves,
the G5100A also can reach users demand on waveforms. It can also generate variable-edge-
time pulses up to 10 MHz. With variable period, pulse width and amplitude the G5100A is
perfectly suited to applications requiring a flexible pulse signal.
Pulse Generation
If a unique Waveform is needed, the G5100-A can generate variable-edge-time pulses up to 10
MHz. With variable period, pulse width and amplitude the G5100A is perfectly suited to
applications requiring a flexible pulse signal.