Atec Picotest-G5100A - Manual (Page 3)

Custom Waveform Generation
The G5100A can generate complex custom waveforms. With 14-bit resolution and a 125 MSa/s
sampling rate, the G5100A gives users the flexibility to create waveforms. It also allows users to
store up to 5 waveforms, 4 (4 x 256k Points) in nonvolatile memory and 1 in volatile memory.
The G5100A’s Waveform Editor Software allows users to create, edit and download complex
waveform. In addition, by using the software, users can retrieve waveforms from Agilent MSO
8104 oscilloscope.
Support External Freq. Synchronization
The G5100A’s external frequency reference allows users to synchronize an external 10MHz
clock to another G5100A, or to any other unit which can support 10MHz frequency-input
function.
Data Transmission via Pattern Out
The WavePatt software adheres to the waveform editor. It allows users to create and store 16-
bit data in the G5100A’s nonvolatile or volatile memory. Then, according to application
purposes, users can transmit data via Pattern Out, located in the rear panel.