Atec Fluke-1760 - Manual (Page 6)

6 Fluke Corporation Fluke 1760 Three-Phase Power Quality Recorder Topas
Specifications
General
Warranty years
Quality system Developed and manufactured as per ISO 9001: 000
Reference conditions Environment temp.: 3 °C ± °C (74 °F ± °F)
Power supply: 30 V ± 10 %
Power frequency: 50 Hz/60 Hz
Signal: declared input voltage U
din
Averaging: 10 minute intervals
Intrinsic uncertainty All specified intrinsic uncertainties are valid under these reference conditions
Display The Fluke 1760 features LED indicators for the status of the 8 channels, phase sequence,
power supply (mains or battery), memory usage, time synchronization, and data transfer.
Power LED Permanent light: normal power supply from mains
OFF: supply via internal battery in case of a power failure
Channel LEDs 3-color LEDs per channel for:
• overload condition
• under load condition signal level in nominal range
Data memory GB flash memory depending on model
Memory model Linear
Interfaces Ethernet (100 MB/s), RS 3, external modem via RS 3
Baud rate for RS 232 9600 Baud to 115 kBaud
Dimensions (H x W x D) 35 mm x 300 mm x 65 mm (13 in x 11.8 in x .6 in)
Weight (without accessories) appr. 4.9 kg (10.8 lb)
Calibration interval 1 year recommended for Class-A, otherwise years
Ambient conditions
Working temperature range -0 °C to 50 °C (-4 °F to 1 °F)
Storage temperature range -0 °C to 60 °C (-4 °F to 140 °F)
Reference temperature 3 °C ± °C (74 °F ± °F)
Climatic class B (IEC 654-1), -0 °C to 50 °C (-4 °F to +1 °F)
Max. operating altitude 000 m: max. 600 V CAT IV*, power supply: 300 V CAT III
5000 m: max 600 V CAT III*, power supply: 300 V CAT II
*depending on sensor
Housing insulated, robust plastics housing
EMC
Emission Class-A as per IEC/EN 6136-1
Immunity IEC/EN 6136-1