Atec LeCroy-WAVEPRO-950-960 - Manual (Page 5)

Environmental and Safety
Operating Conditions
Temperature 5 – 40 °C rated accuracy (41 to 104 °F)
0 – 45 °C operating
-20 – 60 °C non-operating
Humidity 75% max relative humidity, non-condensing at 45 °C
Altitude 3 000 meters (10 000 feet) operating at 25 °C 4 500 meters (15 000 feet) non-operating
CE Approved
EMC EMC Directive 89/336/EEC; EN 61326-1 Emissions and Immunity
Safety Low Voltage Directive 73/23/EEC; EN 61010-1 Product Safety (Installation Category II, Pollution
Degree 2)
UL and cUL approved UL Standard UL 3111-1
cUL Standard CSA-C22.2 No. 1010-1
Service
LeCroy service programs include unique service upgrades for LeCroy oscilloscopes, metrology modules
customized for your company, and more. Whether you own one LeCroy instrument or hundreds,
whether you need prompt attention from our service offices or an onsite service contract, LeCroy is
committed to your success. Call your LeCroy service representative to discuss your company’s specific
requirements.
General
Auto Calibration Ensures specified DC and timing accuracy is maintained for 1 year minimum
Auto Calibration time <500 ms
Power Requirements 90 – 132 V AC at 45-440 Hz; 180–250 V AC at 45-66 Hz; Power consumption:350 VA max
Battery Backup Front panel settings retained for two years minimum
Warranty and Calibration Three years; calibration recommended yearly
Physical Dimensions
Dimensions (HWD) 264 mm x 397 mm x 453 mm; 10.4" x 15.65" x 17.85" (height excludes feet)
Weight 14 kg; 31 lbs (with internal printer)
Shipping Weight 22.2 kg; 49 lbs
*with sample speeds > 4 GS/s