Atec LeCroy-WAVEPRO-950-960 - Manual (Page 3)

Maximum ext. input @ 1
MOhms 100 Vmax ( DC + peak AC < 5 kHz )
Automatic setup
Auto Setup Automatically sets timebase, trigger, and sensitivity to display a wide range of repetitive signals
Vertical Find Automatically sets the vertical sensitivity and offset for the selected channels to display a waveform
with maximum dynamic range
Probes
Model PP005 10 : 1, 10 MOhms with autodetect (one per channel)
Probe System: Probus® Automatically detects and supports a wide variety of differential amplifiers; active, high-voltage,
current, and
differential probes
Scale Factors Up to 12 automatically or manually selected
Color Waveform Display
Type Color 10.4" flat-panel TFT-LCD
Resolution VGA 640 x 480 pixels
Screen Saver Display blanks after 10 minutes (when screen saver is “on”)
Real Time Clock Date, hours, minutes, and seconds displayed with waveform
Number of Traces Display a maximum of eight traces. Simultaneously display channel, zoom, memory, and math traces.
Grid Styles Single, Dual, Quad, Octal, XY, Single + XY, Dual + XY; Full Screen gives enlarged view of each style.
Intensity Controls Separate intensity control for grids and waveforms
Waveform Styles Sample dots joined or dots only — regular or bold sample point highlighting.
Trace Overlap Display Select opaque or transparent mode with automatic waveform overlap management.
Analog Persistence Display
Analog & Color-Graded
Persistence Variable saturation levels; stores each trace’s persistence data in memory.
Trace Selection Activate Analog Persistence on a selected trace, top 2 traces, or all traces.
Persistence Aging Time Select from 500 ms to infinity.
Trace Display Opaque or transparent overlap
Sweeps Displayed All accumulated or all accumulated with last trace highlighted
Zoom Expansion Traces
Display up to Four Zoom
Traces
Vertical zoom up to 5X expansion, 50X with averaging