Atec Fluke-OptiView-XG - Manual (Page 9)

Wireless Network Connection Specifications
Wireless Antennas
Internal Wireless
Antennas
Seven internal 2.4 GHz, 1.1 dBi peak, 5 GHz,
3.2 dBi peak antennas
External Omni-directional
Antenna
Antenna, WLAN, omnidirectional, 2.4 & 5 GHz
802.11 A/B/G, 50 Ω. Gain: 2.1 dBi (2.45 GHz)
2.4 dBi (4.9 GHz), 2.6 dBi (5.25 GHz), 2.5 dBi (5.875 GHz)
External Directional
Antenna
Antenna, frequency range 2.4 - 2.5 and 4.9 - 5.9 GHz
Minimum gain 5.0 dBi peak in the 2.4 GHz band, and 7.0 dBi peak in the 5 GHz band
External Antenna
Connector
Reverse SMA
Wireless Adapters
Data Rate
11a: 6/9/12/24/36/48/54 Mbps
11b: 1/2/5.5/11 Mbps
11g: 6/9/12/24/36/48/54 Mbps
11n (20 MHz): MCS0-23, up to 216 Mbps
11n (40 MHz): MCS0-23, up to 450 Mbps
Operating Frequency 2.4000 ~ 2.472 GHz (Industrial Scientific Medical Band) 5.180 ~ 5.825 GHz
Security 64/128-Bit WEP Key, WPA, WPA2, 802.1x
Transmit Output Power
(Tolerance: ±1.5 dBm)
802.11b: 18 dBm
802.11b: 18 dBm
802.11g: 17 dBm
802.11a: 11 dBm
802.11n: 2.4 GHz:17 dBm
802.11n: 5 GHz:13 dBm
Receive Sensitivity
(Tolerance: ±2 dBm)
802.11a: 10% PER -78 dBm
802.11b: 8% PER -90 dBm
802.11g: 10% PER -80 dBm
802.11n: 2.4 GHz 10% PER
-72 dBm@HT20
-70 dBm@HT40
802.11n: 5 GHz 10% PER
-70 dBm@HT20
-63 dBm@HT40
Power Consumption
(Typical )
Transmitting (Legacy mode, HT20 mode): 870 mA @5 GHz, 700 mA @2.4 GHz
Transmitting (HT40 mode): 900 mA @5 GHz, 750 mA @2.4 GHz
Receiving (Legacy mode, HT20 mode): 550 mA @5 GHz, 520 mA @2.4 GHz
Receiving (HT40 mode): 610 mA @5 GHz, 600 mA @2.4 GHz
9 of 10