Atec Olympus-45MG - Manual (Page 6)

MTD705
D797-SM
D793
D790-SM
D791
D7908
D790
D792/D794 D790-RL
D791-RM
D7906-SM
D790-SL
D798
D799
D798-LF
D7226
* Thickness range dependent on material, transducer type, surface conditions, and
temperature. Full range may require Gain Adjust.
** Maximum temperature with intermittent contact only
† Stainless steel cable available; consult Olympus NDT for details.
†† Transducers used with THRU-COAT ® technology
Transducer
Item
Number
Freq.
(MHz)
Connector
Tip Dia.
mm (in.)
Range (Steel)*
mm (in.)
Temp. Range**
°C (°F)
Cable
Item
Number
D790 U8450002
5.0
Straight
11.00
(0.434)
1.00 to 500.00
(0.040 to 20.000)
–20 to 500
(–5 to 932)
Potted —
D790-SM U8450009 Straight LCMD-316-5B † U8800353
D790-RL U8450007 90° LCLD-316-5G † U8800330
D790-SL U8450008 Straight LCLD-316-5h U8800331
D791 U8450010 5.0 90°
11.00
(0.434)
1.00 to 500.00
(0.040 to 20.000)
–20 to 500
(–5 to 932)
Potted —
D791-RM U8450011 5.0 90°
11.00
(0.434)
1.00 to 500.00
(0.040 to 20.000)
–20 to 400
(–5 to 752)
LCMD-316-5C U8800354
D792 U8450012
10
Straight
7.20
(0.283)
0.50 to 25.00
(0.020 to 1.000)
0 to 50
(32 to 122)
Potted —
D793 U8450013 90° Potted —
D794 U8450014 5.0 Straight
7.20
(0.283)
0.75 to 50.00
(0.030 to 2.000)
0 to 50
(32 to 122)
Potted —
D797 U8450016
2.0
90°
22.90
(0.900)
3.80 to 635.00
(0.150 to 25.000)
–20 to 400
(–5 to 752)
Potted —
D797-SM U8450017 Straight LCMD-316-5D U8800355
D7226 U8454013
7.5 90°
8.90
(0.350)
0.71 to 100.00
(0.028 to 4.000)
–20 to 150
(–5 to 300)
Potted —
D798-LF U8450019
D798 U8450018
7.5
90°
7.20
(0.283)
0.71 to 100.00
(0.028 to 4.000)
–20 to 150
(–5 to 300)
Potted —
D798-SM U8450020 Straight LCMD-316-5J U8800357
D799 U8450021 5.0 90°
11.00
(0.434)
1.00 to 500.00
(0.040 to 20.000)
–20 to 150
(–5 to 300)
Potted —
MTD705 U8620225 5.0 90°
5.10
(0.200)
1.00 to 19.00
(0.040 to 0.750)
0 to 50
(32 to 122)
LCLPD-78-5 U8800332
D7906-SM †† U8450005
5.0
Straight 11.00
(0.434)
1.00 to 50.00
(0.040 to 2.000)
0 to 50
(32 to 122)
LCMD-316-5L U8800358
D7906-RM †† U8450025 90° LCMD-316-5N U8800647
D7908 †† U8450006 7.5 90°
7.20
(0.283)
1.00 to 37.00
(0.040 to 1.500)
0 to 50
(32 to 122)
Potted —
Dual Element Transducers for Corrosion Gaging
All standard dual element transducers feature Automatic Probe Recognition, which automatically recalls a default V-path
correction for each specific transducer.
6