Atec Olympus-45MG - Manual (Page 10)

Frequency
(MHz)
Element
Diameter
Transducer
Item
Number
mm inches
0.5 25 1.00 M101-SB* U8400017
1.0 25 1.00 M102-SB* U8400018
1.0 13 0.50 M103-SB* U8400020
2.25 13 0.50 M106-RM
M106-SM
U8400023
U8400025
2.25 13 0.50 M1036 U8400019
5.0 13 0.50 M109-RM
M109-SM
U8400027
U8400028
5.0 6 0.25 M110-RM
M110-SM
M110h-RM**
U8400030
U8400031
U8400029
10 6 0.25 M112-RM
M112-SM
M112h-RM**
U8400034
U8400035
U8400033
10 3 0.125 M1016 U8400015
20 3 0.125 M116-RM
M116-SM
U8400038
U8400039
20 3 0.125 M116h-RM** U8400037
* These transducers can only be used with the high Penetration software option.
** Use with spring loaded holder
m101-sb
m103-sb
m102-sb m1036
m106-rm
m106-sm
m109-rm
m109-sm
m110-rm
m1061
m112-rm
m116-rm
m116-sm
m112-sm
Contact Transducers
Sonopen ®
Transducers
The Sonopen transducer has
a replaceable delay line that is
tapered to a small contact area.
This transducer makes reli-
able thickness measurements
in applications such as turbine
blades and tight radii on plastic
containers.
Sonopen – replaceable Delay
Lines
Tip Diameter
Part
Item
Number
mm inches
2.0 0.080 DLP-3 U8770086
1.5 0.060 DLP-302 U8770088
2.0 0.080 DLP-301 † U8770087
† high temperature delay for use up to
175° C (350° F)
Sonopen – 15 Mhz, 3 mm (0.125 in) transducer
Straight Handle Right Angle Handle 45° Handle
Part
Item
Number
Part
Item
Number
Part
Item
Number
V260-SM U8411019 V260-RM U8411018 V260-45 U8411017
v260-45 v260-sm v260-rm
dlp-301
Frequency
(MHz)
Element Diameter
Transducer
Item
Number
mm inches
2.25 13 0.50 M306-SU U8410027
5.0 13 0.50 M309-SU U8420001
5.0 6 0.25 M310-SU U8420004
10 6 0.25 M312-SU U8420008
15 6 0.25 M313-SU U8420009
20 3 0.125 M316-SU U8420011
Immersion Transducers
Panametrics Microscan immersion transducers are designed
to transmit and receive ultrasound in water. Thickness mea-
surements by immersion technique are often preferred when
the test piece has a complex geometry or in on-line appli-
cations. Typical off-line applications include wall thickness
measurements on small diameter plastic or metal tubing,
scanned or rotary measurements and thickness measure-
ments on sharply curved parts. Transducer focusing may be
necessary depending on the application.
rBS-1 Immersion Tank
The RBS-1 immersion tank is designed to simplify ultrasonic
thickness measurements using immersion techniques.
Single Element Transducers for
Precision Thickness Measurements
10