Atec Olympus-45MG - Manual (Page 11)

Freq.
(MHz)
Element
Diameter
Transducer
Item
Number
Holder
Item
Number
mm inches
0.5 25 1.00 M2008* U8415001 —
2.25 13 0.50 M207-RB U8410017 —
5.0 13 0.50 M206-RB U8410016 —
5.0 6 0.25 M201-RM U8410001 —
5.0 6 0.25 M201h-RM U8411030 2127 U8770408
10 6 0.25
M202-RM
M202-SM
U8410003
U8410004
—
10 6 0.25 M202h-RM U8507023 2127 U8770408
10 3 0.125
M203-RM
M203-SM
U8410006
U8410007
—
20 3 0.125
M208-RM
M208-SM
U8410019
U8410020
—
20 3 0.125 M208h-RM U8410018 2133 U8770412
20 3 0.125 M2055** U8415013 —
30 6 0.25 V213-BC-RM** U8411022 —
* These transducers can only be used with the high Penetration software option.
** Delay line is not replaceable on these transducers.
Element
Diameter
Delay Line
Maximum Thickness
Measurement Limit*
Part
Item
Number
Steel - Mode 2 Steel - Mode 3 Plastic - Mode 2
mm inches mm inches mm inches mm inches
13 0.50 DLh-2 U8770062 25 1.0 13 0.5 13 0.5
6 0.25 DLh-1 U8770054 25 1.0 13 0.5 13 0.5
3 0.125 DLh-3 U8770069 13 0.5 5 0.2 5 0.2
* Exact range depends on material sound velocity, transducer frequency, part geometry, and surface
condition.
m2055
m201
m202
m2008
m206-rb 2127
m208
m208h
Delay Line Transducers
Microscan delay line transducers provide excellent performance on very thin materials, at elevated temperatures,
or with applications that require a high degree of thickness resolution.
additional products available at www.olympus-ims.com
Couplants
Liquid couplant is almost always
necessary to provide acoustic coupling
between the transducer and the test
piece. We offer various types of cou-
plants to suit virtually all applications.
Calibration Test Blocks
Test blocks are necessary for the cali-
bration of ultrasonic thickness gages
and should be used to maintain and
verify the accuracy, dependability, and
reliability of ultrasonic measurements.
Blocks are held to tighter tolerances
than stated in ASTM E797 code.
Metric test blocks are available.
Transducer Cables
A wide selection of transducer cables
suitable for all ultrasonic thickness
gaging instrumentation.
• Standard
• Waterproof
• heavy Duty
- Teflon
- Armored PVS Jacket
- Armored Silicone Jacket
- Stainless Steel
replaceable Delay Lines
Delay lines function as a protective buffer
between the surface of the test piece and the
transducer element.
2133
11