Atec Panametrics-38DL-Plus - Manual (Page 6)

6
www.olympus-ims.com
Outer
Surface
Inside
Surface
Total
Thickness
0.2483 in.
HDPE
Layer
0.0781 in.
HDPE
Layer
0.1658 in.
EVOH
Barrier
0.0044 in.
When using single element transducers, you can make accurate
thickness measurements on metals, plastics, composites, glass,
ceramics, and other materials. These transducers are available in
a wide range of frequencies, diameters, and connector styles. The
High Resolution software option allows you to make very precise
measurements at a resolution of 0.0001 in. or 0.001 mm.
• Standard resolution of 0.01 mm (0.001 in.) for all transducers
• High Resolution software option can display measurements up
to 0.001 mm (0.0001 in.) for single element transducers from
2.25 MHz to 30 MHz
• High Penetration software option for measurements on
attenuating materials such as fiberglass, rubber, and thick
castings
• Multilayer software option for individual thickness
measurements of up to four layers simultaneously
• Thickness, Velocity, or time-of-flight measurements
• Application Auto-Recall with default and custom setups to
simplify thickness measurements
High Penetration Software Option
This option allows you to use low frequency single element trans-
ducers (as low as 0.5 MHz) to measure thick or sound attenuating
materials such as rubber, fiberglass, castings, and composites.
Multilayer Software Option
This software option calculates and simultaneously displays thick-
ness measurements of up to four individual layers. It also displays
total thickness of selected layers. Typical applications include
thickness of barrier layers in plastic fuel tanks, bottle preforms,
and soft contact lenses.
Thickness Measurements on Plastics, Metals, Composites,
Glass, Rubber, Ceramics
The High Resolution software option allows thickness measurements of up to 0.001 mm
(0.0001 in.) resolution.
Measure the thickness of many materials including plastic, metal, rubber, glass, ceramic,
and composites.
Many cast metal parts or sound-attenuating materials can be measured with the
High Penetration software option.
The 38DL PLUS can make accurate measurements of up to four individual layers
simultaneously.