beautypg.com

Built for tough environments, Designed for easy operation – Atec Panametrics-38DL-Plus User Manual

Page 3

background image

3

The 38DL PLUS is designed to meet the challenges of demanding
applications and built to withstand tough conditions in the field
and on the production floor. Whether you work in very wet or
dusty conditions, cold or hot climates, or bright or dark areas, the
38DL PLUS can handle any inspection job. Need an instrument
tough enough to tolerate shocks, drops, and rough handling?
The 38DL PLUS with its protective rubber boot and designed for
IP67 rating is your answer.

Built for Tough Environments

Compact, weighs only 0.814 kg (1.80 lb)

Rugged, designed for IP67

Explosive Atmosphere: Safe operation as defined by Class I,

Division 2, Group D, as found in the National Fire Protection

Association Code (NFPA 70), Article 500, and tested using

MIL-STD-810F, Method 511.4, Procedure I.

Shock tested using MIL-STD-810F, Method 516.5, Procedure I,

6 cycles each axis, 15 g, 11 msec Half sine.

Vibration tested using MIL-STD-810F, Method 514.5, Procedure I,

Annex C, Figure 6, general exposure: 1 hour each axis.

Wide operating temperature range

Protective rubber boot with gage stand

Color transflective VGA display with indoor and outdoor color

settings for superior clarity

Designed for Easy Operation

Simple keypad for right hand/left hand operation

Easy operator interface with direct access to all functions

Internal and External MicroSD memory card storage

USB and RS-232 communication ports

Alphanumeric data logger with 475,000 thickness readings

or 20,000 waveforms

VGA output to connect to computer or monitor

Default/Custom dual element transducer setups

Default/Custom single element transducer setups

Password protected function allows locking of instrument

features

What Makes This Thickness Gage Different From Others?

Outdoor display setting, A-scan mode

Indoor display setting, B-scan mode

38DL PLUS with standard protective rubber boot