Atec Noiseken-ESS-2000 - Manual (Page 9)

Electrostatic Discharge Simulator
8
TC-815R
Parameters Specifi cations
Current limiting resistor 15Ω
■ OTHER OPTIONAL ACCESSORY
● Loading Resistor (Current Detector)
Model: 06-00001A
■ OPTIONAL ACCESSORIES
● Free Arm Gun Stand
Model: 03-00022B
Dimensions: W180 × H760 × D70 mm
Weight: Approx. 5kg
● Gun Stand
Model: PS-806
Dimensions: H300 mm
Diameter: 160mm
Weight: Approx. 1.6kg
● Fast Rise Time Adapter
Model: 12-00003A
Enables a fast rise time.
Approx. 200ps (150ps~300ps)
● Impulsive Magnetic Field Adapter Model: 03-00030B
● Impulsive Electric Field Adapter Model: 03-00031B
Simulations of the electric and magnetic fi elds produced by an electrostatic discharge can be separately performed by the
Impulsive Magnetic Field Adaptor and Impulsive Electric Field Adaptor. These adaptors are designed to connect to the
Discharge Gun TC-815R.
03-00030B 03-00031B
Parameters Specifi cations
Discharge resistance 1.5kΩ
Electrode for generating
electric fi eld
80 mm in diameter
Maximum voltage applied 30kV
Parameters Specifi cations
Applied voltage 15kV max
Output impedance 50Ω
Conversion ratio
1V/1A (50Ω termination)
2V/1A (Open)
Output connector N-R type
Dimensions 70 x 39mm
The Loading Resistor (Model: 06-00001A) is used to
check, verify and calibrate the output waveforms of an
electrostatic simulator for conducting an electrostatic
discharge immunity test conforming to IEC61000-4-2.
Back drawing Elevation
8-φ3.2PCφ60
Coaxial connector (NR)
240Ωx5 51Ωx25
70φ
(38)