Atec Fluke-990DSL - Manual (Page 4)

Each set includes:
• Extensive on-line help
• Internal results storage, both text and graphical
• RS-232 Serial interface for printing, uploading
results to a PC, and downloading firmware for
the test set
• Rugged weather-resistant handheld design
• High-resolution, backlit LCD display
• Graphical operator prompts and tests results
• Typical 16-hour battery life, with easy-change
NiMH battery and user settable power
save feature
• Protective bag with shoulder strap and
strand hook
• Rubber shock absorbing holster
• AC power supply
• 12 Volt vehicle charger
• Wire gauge
• Users guide
For More Information
For more information or to contact your local Fluke Networks Representative,
call (800) 283-5853. Or send email to [email protected] .
Specifications: Basic 990DSL (continued)
Function Range Accuracy
VF Longitudinal Balance 0 to 70 dB ± 2 dB
Disturbing Frequency 200 to 2500 Hz 0.1%
Impedance 600Ω 1%
Filters C, Psophometric
Send VF Tone
Frequency 100 Hz to 20 kHz 0.1%
Amplitude (Settable) -20 to 3 dBm ± 0.5 dB
(1 dB increments)
Impedance 600Ω, 900Ω 1%
Specifications: 990DSL Wideband Features
Function Range Accuracy
WB Noise/Level
Impedance 100Ω, 135Ω, Bridged 1%
Filters E, F, G, None =
Frequency 10 kHz to 1200 kHz 0.1% ± 508 Hz
Amplitude -50 to 3 dBm ± 1 dB @ 135Ω
-90 to -50 dBm ± 3 dB @ 135Ω
Weighted WB Noise
Impedance 100Ω, 135Ω, Bridged
Filters E, F, G, None
Frequency 10 to 1200 kHz
Amplitude 0 to 30 dBrn ± 5 dB
30 to 120 dBrn ± 3 dB
WB Loss
Impedance 135Ω 1%
Frequency 10 to 1200 kHz 0.1% ± 508 Hz
Magnitude 0 to 50 dB ± 1 dB
50 to 70 dB ± 2 dB
WB Longitudinal Balance 0 to 70 dB ± 2 dB
Disturbing Frequency 20 kHz to 1104 kHz 0.1%
Impedance 100 Ω, 135Ω 1%
Filters E, F, G, None =
Send WB Tone
Frequency 10 to 1200 kHz 0.1% ± 508 Hz
Amplitude (fixed) 0.0 dBm ± 0.5 dB
Impedance 100Ω, 135Ω 1%
WB Impulse Noise
Impedance 100Ω, 135Ω, Bridged 1%
Filters E, F, G, None =
Test Time 1 to 1440 Minutes 1%
Impulse Counter 0 to 9999 =
Counter Threshold -40 to 0 dBm ± 1 dB
ADSL Auto-Test
Impedance 100Ω =
Noise Filters E, F, G, None =
ADSL Standard ANSI Full, G. Lite =
Data Rate Prediction
Resolution 32 kb/s
Downstream Rate 0 to 8192 kb/s ± 96 kb/s
(3 units of resolution)
Upstream Rate 0 to 1024 kb/s ± 64 kb/s
(2 units of resolution)
Specifications: 990DSL TDR Feature
Function Range Accuracy
Impedance 135Ω 1%
Pulse-width 20, 100, 500, 1000, 10% ± 5 ns
2500, 5000 ns
Vop Selection 0.300 to 0.999 =
Range (Vop = 0.64) 30,000 ft. (9144m) =
Range Selection (Auto.) 10 ft. to 48 kf (3 to 14630m) =
Horizontal Resolution 0.5 to 156 ft. (0.1524 to 47.5m) =
Distance to Reflect. 0 to 30,000 ft. (0 to 9144m) 1% ± Vop uncertainty
Vertical Gain 80 dB 2 dB
Power Filter 5 kHz Highpass =
Averaging Filter 4x Waveform Avg. =
Input Protection ± 400 V P =
Ordering Information
Model Description
990DSL Loop Tester
990DSLWT Loop Tester with Wideband and TDR
TN2000 Basic Terminator
TN2100 Enhanced Terminator
990TL-N Test Lead Set (Plain)
990TL-S Test Lead Set (Spike)
990TL-B Test Lead Set (Bed of Nails)
990TL-SB Test Lead Set (Spike and Bed of Nails)
990-Printer 990DSL Serial Graphics Printer (Seiko DPU-414)
990-CASE Deluxe Transport Bag
GOLD Extended Warranty and Service Option
Fluke Corporation
P.O. Box 777, Everett, WA USA 98206-0777
Fluke Networks operates in more than 50 countries
worldwide. To find your local office contact details,
go to
www.flukenetworks.com/contact .
© 2004 Fluke Corporation. All rights reserved.
Printed in U.S.A. 6/2004 1626640 B-ENG-N Rev D
N E T W O R K S U P E R V I S I O N