Atec Fluke-990DSL - Manual (Page 11)

Operational Specifications (continued)
C O P P E R P R O S E R I E S I I S P E C I F I C A T I O N S
Function Range Accuracy
Send WB/BB Tone
Frequency
Amplitude
Impedance
10 kHz to 1.2 MHz5
25 kHz to 18 MHz6
0.0 dBm (fixed)
100 Ω, 135 Ω
0.1%, 508.63 Hz multiples
0.1%, 4312.5 Hz multiples
±1 dB
1%
WB/BB Impulse Noise
Impedance
Filters
Test Time
Impulse Counter
Counter Threshold
Count Interval
100 Ω, 135 Ω, Bridged
4
E, F, G, 1.3 MHz, 20 MHz
1 to 1440 minutes (24 hrs.)
0 to 9999
0 dBm to -40 dBm
-40 dBm to -50 dBm
8 / second
1%
-
1%
-
±1 dB8
±3 dB8 (Typical)
-
DSL Auto-Test
Data Rate estimation
ADSL/2 (1.104 MHz)
ADSL2+ (2.208 MHz)
VDSL (17.664 MHz)
0 – 8 Mb/s
0 - 16 Mb/s
0 - 55 Mb/s
±0.1 Mb/s (typical)
±0.2 Mb/s (typical)
± 2 Mb/s (typical)
TDR Specifications
Launch Pulse
Impedance
Pulse-width
VOP Selection
Range
(VOP = 0.64, 19 Ga.)
Range Selection
Horizontal Resolution
Distance to Reflection
Vertical Gain
Power Filter
Averaging Filter
Input Protection
100 Ω
20 ns, 100 ns, 500 ns, 1000 ns,
2500 ns, 5000 ns
0.300 to 0.999
30,000 ft
10 ft to 48 kft (Auto.)
0.5 ft to 156 ft
0 ft to 30,000 ft
80 dB
5 kHz Highpass
4 waveform average
±400 V peak
1%
10 % ±5 ns
-
-
-
-
1% ±VOP uncertainty
2 dB
-
-
-
Notes
1 Dist. to End; Dist. to Split >50 ft; Split pairs must be same length ±5 %.
2 RTS = Resistance to Strap
3 Bridged = >100 k Ω
4 Bridged = >5 k Ω
5 Nyquist (Fine) resolution
6 DMT (Coarse) resolution
7 @ 25° C ± 25° C; battery-powered
8 Accuracies specified with E, F, G, and 1.3 MHz filters @ center frequencies, with 100 Ω or 135 Ω terminations.
Additional +/- 2 dB (typ.) tolerance required for 20MHz filter
9 0.25 MHz to 12 MHz. Additional ±1 dB tolerance required from 12 MHz to 17.5 MHz.
Model Description
990DSL2+ CopperPro Next Gen Copper Loop Analyzer with TDR and wideband
spectral analysis for ADSL2+
990VDSL CopperPro Next Gen Copper Loop Analyzer with TDR and wideband
spectral analysis for VDSL
990-GM/2 ADSL/ADSL2/2+ Golden Modem Option for CopperPro Series II Loop
Testers/Analyzers
990-GM/V-2 ADSL and VDSL Golden Modem Option for CopperPro Series II Loop
Testers/Analyzers with CPE and CO emulation
Ordering Information