Atec Agilent-8564E - Manual (Page 6)

6
Spurious responses
General spurious responses
(Mixer level –40 dBm)
<(–75 + 20 x log N 1 ) dBc
Residual responses
≤
90 dBm, for the range from 200 kHz to 6.46 GHz, no input
signal, 0 dB input attenuation
Display range
Viewing area approximately 7 cm (V) x 9 cm (H)
Scale calibration 10 x 10 divisions
Log scale 10, 5, 2, 1 dB per division
Linear scale 10% of reference level per division
Scale fidelity
Incremental Maximum
Log range 0 to –90 dB 0 to –90 dB
RBW >= 300 Hz ±0.1 dB/dB ±0.85 dB
RBW <= 100 Hz ±0.2 dB/2dB ±0.85 dB 5
Linear range ±3% of reference level
Amplitude specifications, continued
Second harmonic distortion
input signal
Mixer level Distortion SHI
20 MHz to 1.45 GHz –40 dBm
≤
79 dBc2 +39 dBm2
1.45 GHz to 2 GHz –10 dBm3
≤
85 dBc3 +75 dBm3
2 GHz to 13.25 GHz
8562E, 8563E –10 dBm
≤
100 dBc +90 dBm
8564E, 8565E –10 dBm ≤ 90 dBc +80 dBm
13.25 GHz to 25 GHz –10 dBm
≤
90 dBc +80 dBm
Third order intermodulation distortion
(Two –30 dBm signals,
≥
1 kHz apart) Mixer level Distortion TOI
20 MHz to 2.9 GHz –30 dBm each
≤
82 dBc4 +11 dBm
2.9 GHz to 6.46 GHz –30 dBm each
≤
90 dBc +15 dBm
6.46 GHz to 26.8 GHz –30 dBm each ≤ 75 dBc +7.5 dBm
26.8 GHz to 50 GHz –30 dBm each
≤
85 dBc (nominal) +12.5 dBm (nominal)
Image responses Mixer level
10 MHz to 26.8 GHz –10 dBm –80 dBc
26.8 GHz to 50 GHz –30 dBm –60 dBc
Multiple and out-of-band responses Mixer level
10 MHz to 26.8 GHz –10 dBm –80 dBc
26.8 GHz to 50 GHz –30 dBm –55 dBc
1. Excluding display related side bands at multiples of 60 Hz
2. 8561E: distortion –72 dBc, SHI +32 dBm
3. 8561E: mixer level –20 dBm, distortion –72 dBc, SHI +52 dBm
4. 8561E –78 dB distortion with two –30 dBm signals, 9 dBm TOI
5. Maximum for 0 to –100 dB is ±1.5 dB