Atec Agilent-8564E - Manual (Page 3)

3
Sweep time
Range
Span = 0 Hz
50 µs to 6000 s
Span ±100 Hz
RBW
≥
300 Hz 50 ms to 2000 s
RBW
≤
100 Hz 50 ms to 100 ks
Accuracy (Span = 0 Hz)
Sweep time
≥
30 ms ±1% (digitized trace data)
Sweep time <30 ms ±10% (analog trace data)
(non-Option 007)
Sweep time <30 ms
±0.1% (digitized trace data)
(Option 007 1 )
Sweep trigger delayed, free run, single,
line, video, external
Resolution bandwidth
Range (–3 dB) 1 Hz to 1 MHz in a 1, 3, 10 sequence
and 2 MHz (3 MHz at –6 dB)
Option 103 10 Hz to 1 MHz in a 1, 3, 10 sequence
and 2 MHz (3 MHz at –6 dB)
Accuracy 1 Hz to 300 kHz ±10%
1 MHz ±25%
2 MHz +50%, –25%
Selectivity (–60 dB/–3 dB BW ratio)
RBW
≥
300 Hz <15:1
RBW
≤
100 Hz <5:1
Video bandwidth 1 Hz to 3 MHz in a 1, 3, 10 sequence
range
Noise sidebands (see figure 1)
Center Frequency
≤
1 GHz
Offset Opt. 103
100 Hz
≤
88 dBc/Hz 2 ≤
70 dBc/Hz 2
1 kHz
≤
97 dBc/Hz 2 ≤
90 dBc/Hz 2
10 kHz 6 ≤
113 dBc/Hz 3 ≤
113 dBc/Hz 3
30 kHz 6
,
8 ≤
113 dBc/Hz 4 ≤
113 dBc/Hz 4
100 kHz 7 ≤
117 dBc/Hz 5 ≤
117 dBc/Hz 5
Residual FM
(zero span, 10 Hz RBW)) <1 Hz pk-pk x N 9 in 20 ms
<0.25 Hz pk-pk x N 9 in 20 ms
(typical)
Option 103 <10 Hz pk-pk x N 9 in 20 ms
Frequency specifications, continued
1. Option 007 extends digitized trace data capability to sweep times <30 ms.
2. Add 5.2 x ((f/1 GHz)–1) for f >1 GHz and f
≤ 2.9 GHz
3. Add 2.5 x ((f/1 GHz)–1) for f >1 GHz and f
≤
2.9 GHz
4. Add 3.0 dB x ((f/1 GHz)–1) for f >1 GHz and f ≤ 2.9 GHz
5. Add 2 dB for f >1 GHz and f
≤
2.9 GHz
6. RBW ≤ 1 k or Span ≤ 745 kHz
7. RBW
≥
3 k or Span >745 kHz
8. Not specified at 30 kHz offset for 8564E and 8565E
9. N = harmonic mixing mode number