Atec Agilent-8564E - Manual (Page 10)

Option 002 built-in tracking generator 2
(8560E only)
Frequency specifications
Frequency range 300 kHz to 2.9 GHz
Accuracy
After peaking ±(frequency reference
accuracy x tuned frequency
+5% x span + 295 Hz)
Tracking drift (nominal) Usable in 1 kHz RBW
after 5-minute warm-up,
usable in 300 Hz RBW
after 30-minute warm-up.
Minimum RBW 300 Hz 3
Amplitude specifications
Output level –10 dBm to +1 dBm
(10 dBm to +2.8 dBm typical)
Resolution 0.1 dB
Accuracy
Vernier
±0.20 dB/dB, ±0.5 dBm
max (25 °C ±10 °C)
Absolute ±0.75 dB
Level flatness ±2.0 dB
Effective source match 1.92:1 (nominal)
Total absolute accuracy ±3.25 dB
10
Option 001 second IF output, Agilent 8560 series
(All values are nominal)
3 dB bandwidth 8560E 8561E 8562E 8563E 8564E,8565E
NF
conversion gain
30 Hz to 2.9 GHz1 >25 MHz >25 MHz >25 dB >25 MHz >25 MHz
24 dB 25 dB 20 dB 25 dB 28 dB
1.2 dB –6.5 dB –1.2 dB –1.2 dB –1.2 dB
2.9 GHz to 6.5 GHz >30 MHz >30 MHz >30 MHz >30 MHz
26 dB 22 dB 22 dB 23 dB
–1 dB –3 dB –1 dB –1 dB
6.5 GHz to 13.2 GHz >37 MHz >37 MHz >37 MHz
26 dB 26 dB 28 dB
–5.7 dB –5.7 dB –5.7 dB
13.2 GHz to 22 GHz >45 MHz >45 MHz
30 dB 32 dB
–8 dB –8 dB
22 GHz to 26.8 GHz >45 MHz >45 MHz
32 dB 35 dB
–8 dB –8 dB
26.8 GHz to 31.15 GHz >25 MHz
28 dB
–9 dB
31.15 GHz to 40 GHz >25 MHz
38 dB
–19 dB
40 GHz to 50 GHz >25 MHz
42 dB
–23 dB
Options
1. DC coupled for frequencies below 100 kHz. Option 006 required for operation below 9 kHz in 8563E, 8564E, 8565E.
2. Option 002 deletes millimeter external mixer capability (Second IF input is deleted)
3. Tracking generator not usable with resolution bandwidths
≤ 100 Hz