Specifications, Continued) – Atec Agilent-N9342C User Manual
Page 10
10
Specifications
(continued)
Option specifications (continued)
Supplemental information
Built-in GPS receiver and GPS antenna (Option GPS)
GPS information tagging
Longitude, latitude, and altitude
GPS antenna
Built-in
Frequency accuracy with GPS on
± 50 ppb
External GPS antenna connector
SMA-F
External GPS antenna, N934xC-GPA, is
offered as an optional accessory
USB peak and average power sensor support (Option PWP)
Power sensor supported
Agilent U2020 X-series USB peak and
average power sensor
Frequency range
50 MHz to 40 GHz
Sensor dependent
Peak power dynamic range
–30 to +20 dBm
USB average power sensor support (Option PWM)
Power sensor supported
Agilent U2000 Series USB power sensor
Frequency range
9 kHz to 24 GHz
Sensor dependent
Dynamic range
–60 to +44 dBm
Sensor dependent
Security features (Option SEC)
Security erase
Erase the entire user flash memory by
writing single character “1” over all
memory locations
Non-recoverable
Port control
Disable/enable LAN port or USB port
Task planner for test automation (Option TPN)
Task plan execution mode
Auto, manual, and manual if fail
Task plan file
.TPN
Complementary task plan editor is available
with HSA PC software
Number of tasks
Maximum 20 in a single .TPN file
Measurements supported
Regular spectrum analysis and power suite
(channel power, ACPR, and OBW)
Visit